C Series Constant Current LED Driver Module

Best solution for DC powered LED driving


Features

On-board current selection

Eliminates the need of holding stock for 350mA, 700mA, 1000mA and 1400mA drivers separately

On-board thermal protection

If the temperature of the driver module reaches a certain value, the driver starts to dim the current to run cooler. Highly increases reliability.

Highest efficiency product on the market

For most input/output voltage range efficiency is over 90%. Can be modified to reach up to 98%.

Dimmable

Can be dimmed with PWM, 0-10V* or potentiometer* input.
*Dimboard is needed for 0-10V and potentiometer dimming.

Fotoğraflar Yükleniyor...
List of Accessories
Dimboard
A400.1000.50.01
Add-on board for 0-10V and potentiometer dimming
CON-C620
A400.1000.50.10
Input/output connector cable, 20cm,6 pin dupont connector
CON-C630
A400.1000.50.11
Input/output connector cable, 30cm,6 pin dupont connector
CON-C330
A400.1000.50.12
Input/output connector cable, 30cm,3 pin dupont connector
PH-6/90
A400.1000.50.13
6 pin, 2.54mm pitch, right angle pin header
SP-C1
A400.1000.50.14
Snap-in mini spacer for 2.0mm holes
C3-IN-1
A400.1000.50.15
PCB with 3 PWM inputs and 3 outputs (bare pcb)

D Series Constant Current LED Driver Module

Best solution for low voltage AC powered LED driving


Features

Can run on both AC and DC input

Works with 9-40V DC or 7-30V AC input

Dimmable

Can be dimmed with PWM, 0-10V and potentiometer

Soft-start capability

Has internal soft start to prevent current inrush to LEDs.

Fotoğraflar Yükleniyor...
List of Accessories
SC-235
A400.1000.61.11
Screw terminal block, Green, 2 position, 3.5mm pitch
POT-1K
A400.1000.61.12
Mini potentiometer for on-board current adjustment

Custom LED Driver module

Custom size and hole location


Multiple LED drivers on a single board


Optimized for your input/output requirements


Fast, economic design and prototyping



Fotoğraflar Yükleniyor...